Drum Wood Chipper Biomass Waste Crusher Wood Shredder

• Customization: Available
• Warranty: 1 Year
• Certification: CE, ISO
• Model NO.: HX218 426 428
• After-sales Service: Technical Support Through Life Span of The Machine
• Name: Drum Wood Chipper
• Application: Wood Logs, Branches, Straw, etc.
• Feed Conveyor: 4-6m Belt Type
• Discharge Conveyor: 10m Belt Tyep
• Output Size: Adjustable
• Transport Package: FCL
• Specification: 2 x 2.2 x 1.25m
• Trademark: HX
• Origin: Shandong, China
• HS Code: 8465960000
• Production Capacity: 30 Sets/Month

Product Description

Product Description

Drum wood chipper is a specialized machine for producing wood chips in wood factory, and widely used for preparing raw material in chipboard plant, fiberboard plant and paper-making plant.
Raw material of wood chipper are mainly undersized log, wood cutting residue (branch, twig) and wood processing residue (slab, batten, wood core, and waste veneer), as well as non-wood material (such as waste of flax, cotton stalk, reed and bamboo.)

Product Structure

Wood chipper is composed of engine base, knife roller, upper and below feeding mechanism, feeding conveying device, discharging conveying device, hydraulic buffer system and electrical control system.

Engine base
   Engine base is welded by high strength steel plate and it is the supporting base of the whole machine. Dead knife base bearing and base engine are welded together and is used for placing dead knife. Dead knife is fastened to dead knife base by high-strength blot and pressing block. Output wood chips drop down through screen  mesh and goes out at the bottom of engine base. Large wood chips will be chipped again by chipping rod.
Knife roller
   Knife roller is the working part of wood chipper. It is welded by steel plate, has good rigidity and moment of inertia, and go through dynamic balance test.
   Main shaft and knife roller is connected by locking device, which has the feature of simple structure, easy assembly and disassembly. Both ends of main shaft are supported by automatic Spherical Roller Bearings. Bearing pedestal is fixed on the engine base.
   There are four fly- cutters on the knife roller and fastened by high-strength bolt and pressing block.
Upper and below feeding mechanism
   Upper feeding mechanism is composed of upper feeding roller base, feeding roller, feeding roller axle, spindle and reduction gearbox. Below feeding mechanism is composed of feeding roller, supporting roller, feeding roller axle and reduction gearbox.
Feeding roller is large in diameter, heavy and has coarse teeth on the surface, so that it can bite raw material tightly to make raw material enter chipping position at the constant speed and guarantee qualified output chips. Upper feeding roller and below feeding roller are staggered so that fragment is cleared away.
   Upper feeding roller is fastened to shaft by locking device. Shaft is supported by Spherical Roller Bearings. Bearing pedestal is fastened onto the upper feeding roller base. Upper feeding roller base is installed onto engine base by pendulum shaft, and can swing up and down circled by spindle. This ensure that it can adjust itself for different feeding height.
Below feeding roller is fastened to shaft by locking device. Shaft and supporting roller are supported by Spherical Roller Bearings. Bearing pedestal is fastened onto engine base. Upper and below gear motor drive upper and below feeding roller respectively. Upper feeding roller rotates in the same direction. But below feeding roller rotates at the opposite direction of knife roller.
Feeding conveyor
   Feeding conveying device is belt conveyor with the length of 4 meters.
Discharging conveyor
   Discharging conveying device is belt conveyor with the length of 10 meters.
Hydraulic buffer system
   Hydraulic buffer system is composed of hydraulic power unit (share one hydraulic power unit with foldable discharging device), one-way oil cylinder, one-way throttle valve, energy accumulator, stop valve and other pipe elements.
Oil pump supply oil cylinder with oil, and it enables upper feeding mechanism lift up and reduce its weight.

Detailed Photos

Product Parameters

Model	HX218	HX426	HX428
Rotor diameter (mm)	800	650	800
Cutter quantity (piece)	3	4 or 24	4 or 24
Input size (mm)	680 x 310	1250 x 250	1250 x 310
Rotor rotation speed (rpm)	650	600	650
Max material diameter (mm)	300	240	300
Production capacity (TPH)	8-10	10-12	12-15
Main motor power (kw)	110	132	160
Feeding conveyor length (m)	4	4	4
Discharge conveyor length (m)	10	10	10
Weight (t)	7	8.2	10.4

Packaging & Shipping

Company Profile